|FS2002/FS2004 Dornier DO335 A12.The Dornier Do 335 Pfeil ("Arrow"), unofficially also Ameisenbar ("anteater"), was a World War II heavy fighter built by the Dornier company. The Pfeil's performance was much better than any similar design due to its unique "push-pull" layout and the Luftwaffe was desperate to get the design into squadron use, but delays in engine deliveries meant only a handful were delivered before the war ended.A12 is a training plane of two seat. Two kinds of models(A12 two seat trainer and night fighter) are included. By Kazunori Ito.|
Dornier DO335 A12/Night Fighter
by Kazunori Ito
1.Description of this aircraft
3.About the installation
4.About the operations
5.About free software
6.About the directions point in FS2004 and FSX
1. [ Description of this aircraft ]
The Dornier Do 335 Pfeil ("Arrow"), unofficially also Ameisenbar ("anteater"), was a World War II heavy fighter built by the Dornier company.
The Pfeil's performance was much better than any similar design due to its unique "push-pull" layout and the Luftwaffe was desperate to get the design into squadron use, but delays in engine deliveries meant only a handful were delivered before the war ended.
A12 is a training plane of two seat.
2. [ Specification ]
Length : 45.4 ft (13.85 m)
Wingspan : 45.1 ft (13.8 m)
Height : 15 ft (4.55 m)
Wing area : 592 sq ft (55.00 sq m)
Empty Weight : 11,484 lb (5,210 kg)
Maximum take-off Weight : 19,500 lb (8,590 kg)
Powerplant : Engines 2x Daimler-Benz DB603A
Power 2x 1,750 PS (1,287 kW)
Maximum speed : 474 mph (765 km/h)
Combat range : 721 miles (half load) (1.160 km)
Ferry : range
Ceiling : 37,400 ft (11,400 m)
Guns 1x 30mm MK 103
2x 20mm MG 151/20
Bombs 2,200 lb (1,000 kg)
Crew : 1 or 2
3. [ About the installation ]
The airframe must copy the DO335 A12 folder as it is in the Aircraft folder of FS2002 or FS2004.
Please copy all files in the gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004.
A general gauge is saved for the gauge bundled this time.
GPS is not bundled.
Please set up it by yourself.
4. [ About the operations ]
Shift+"E" = Front Canopy and Step Open/Shut
!! A special key operation !!
(Shift+"E")+"2" = Rear Canopy and Step Open/Shut
Shift and "E" are pushed at the same time. afterwards, please push "2".
"2" Key is "2" of the main keyboard.
It doesn't move by "2" of ten keys.
Concorde Nose Key = Bomb Bay Open/Shut
This key is an arbitrary key that you are setting as key for Concorde Nose operation.
* for special key operation, *
* It is likely not to operate according to a set method of *
* your FS or the state of other Add-on tool. *
5. [ About free software ]
All aircraft that I made are free software.
The reprint and the repaint may go freely.
However, please defend the following conditions.
1.The change in contents of this file is prohibited.
(Please distribute it like the Zip file of the current state when distributing it. )
2.Please neither reverse-assembly nor never remodel(convert) it of the aircraft model.
3.Please don't bundle my airframe(MDL file) in the package of your works when you open the repaint to the public.
(Please open only the texture to the public. )
4.Don't use DXT format for making texture.
Please make it by the format that everyone can change.
It is necessary to be able to read and change with usual drawing software.
5.It is prohibited to bundle and to open a new panel to the public to my aircraft model.
(Please open only the panel to the public.
It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
6.I maintain the copyright of the aircraft model and the panel background.
7.The copyright of the gauge belongs to the author.
6. [ About the directions point in FS2004 and FSX]
This aircraft model is made by using FSDS Ver2.24.
Therefore, it is possible to play basically in FS2004(FS9) and FSX(FS10).
For a wide large-scale aircraft, the distortion is caused and the phenomenon of the aerofoil tip's disappearing happens in the spot shooting mode.
If this phenomenon happens, Please switch to the spot shooting mode by using other small aircraft.
Afterwards, if this aircraft is selected, it is normally displayed.
Because gauges do not correspond to FSX, the gauges in the cockpit are not displayed.
Please you looks for a suitable gauges and setup Panel.cfg by yourself.
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come.