|FS2004 Agusta HH-3F Pelican. After the experience acquired in
building (under licence) the Sikorsky H-3/S-61R Sea King, Agusta
started the production of this more versatile Agusta HH-3F Pelican
for the Italian Air Force as replacements of the Grumman HU-16
Albatross used for S.A.R. (Search and Rescue). The five-bladed
Agusta HH-3F helicopters perform S.A.R. missions on land and sea in
peace time and C/SAR (Combat SAR) during military assignents. Here
is modeled the long-range search and rescue helicopter Agusta HH-3F
Pelican based in Pratica di Mare AB. This model features reflective
skin, VC, full animations plus floating apability. Uses eight gauges
made by I. D'Attomo, the remainder are default gauges. Textures come
from photos shot by the author and the cockpit background is made
from scratches. By Giovanni Quai
FS2004 Agusta HH-3F Pelican
Flight Simulator FS2002 Helicopter / FS2002 Downloads Military Helicopter
Compatibility: Flight Simulator 2004
Filesize: 1.95 MB
Added on: Oct-21-2009
This is a full package (aircraft and panel) for FS 2004 (FS9)
This file also works on FSX, but the panel (default gauges) and sound
configuration might require some changes.
DO NOT INSTALL THIS FILE ON FSX IF YOU DON'T FEEL SURE ABOUT NOTES 1 AND 2
(Please read Notes for FSX at the bottom of this page before installing).
After the experience aquired in building (under licence) the ''Sikorsky
H-3/S-61R sea king'', Agusta started the production of this more versatile ''
Agusta HH-3F Pelican'' for Italian Air Force as replacements of the Grumman
HU-16 Albatross used for S.A.R. (Search and Rescue).
The 5 bladed Agusta HH-3F helicopters perform S.A.R. missions on land and sea in
peace time and C/SAR (Combat SAR) during military assignments.
Here is modeled the Long-range search and rescue helicopter ''Agusta HH-3F
Pelican'' based in
Pratica di Mare AB.
This model features reflective skin, VC, full animations plus floating
I used 8 gauges made by I. D'Attomo, the remainder are default gauges. Textures
come from photos shot by the author and the cockpit background is made from
You MUST also insert the enclosed 'GougeSound.dll' in the Main FS9 folder,
otherwise you will experience an FS crash!!
Unzip this file into your Flight Simulator 9aircraft, folder and you will find
the "AGUSTA_HH-3F" folder with the usual subfolders and a 'GougeSound.dll', then
operate as follows:
Copy the enclosed 'GougeSound.dll' then Paste in your main Flight Simulator 9
folder (if you don't have it yet).
Nothing else is required...this should be the end of the installation procedure
(FS9 or FSX).
Flying on virtual cockpit please move the eyepoint as required for better vision:
(check your eyepoint keyboard on FS optionscontrolsassignements for the keys
required to move the 'eyepoint of view' (left/right/up/down/back or forward).
Use Wingfold KEY to open/close the cargo door (on ground or floating only).
BIG THANKS to my collegue Italo D'Attomo for his suggestions and for providing
THE MODEL HAS BEEN TESTED MANY TIMES TO ENSURE THE PROPER
OPERATION, AND ALL IS DONE TO AVOID ERRORS.
I WILL NOT ACCEPT ANY RESPONSIBILITY FOR CONSEQUENTIAL INCIDENTAL
OR ANY SYSTEM DAMAGE DUE TO THE FAILURE OR IMPROPER OPERATION OF
THE SOFTWARE. THERE IS NOT ANY WARRANTY EXPRESSED OR IMPLIED FOR
NOT TO BE SOLD! THIS SOFTWARE IS FREEWARE !
Any comments and sugestions please write to:
The author grants permission for repainting purposes only.
I installed, succesfully, this model on my ''FSXsimobjects
original FSX Deluxe Edition plus SP1 without using installers, simply following
the same procedure as for FS9.
Simmers running Sp2 or accelerators might encounter some not desired effects.
Note 1: Loading the aircraft for the first time you will get an 'unknown author'
message for each of our gauges...
(8 gauges...16 clicks).
Click 'YES' if you like our gauges or 'NO' if you don't. If you say 'NO' you
will not have our instruments displayed on the panel, except the default ones.
Note 2: You will get a second message asking you to "trust" the related gauge;
if you click "Yes" when asked, you will never be asked again.
PLEASE READ CAREFULLY BOTH MESSAGES .
Note 3: If you want to see a different panel, copy or aliase a panel of a
Chopper of your choice, in this case the VC will not be shown correctly.
You might also create a panel by removing our gauges and installing your
Note 4: Installing & using this package is at your own risk.
Note 5: SettingsDisplayGraphics; selecting ''Light_Bloom'' check box, in the
global options window, might not be compatible with our model and the selected
plane may not appear.
october , 2009
P.S. more freeware aircrafts from the above author may be found in 'flightsim.com'.
Just write the author' name in the 'search for text' box.
P.P.S. Some videos of the 'Agusta' are available on YouTube.